We Show You The Car Radio Exchange With This Practical Suggestion

The way to remove the old car stereo. Before you can set up the new car stereo, you need to get rid of the old radio. To do so, first disconnect the battery and then proceed as follows: Remove the frame or cover from your old car radio and remove the radio’s user interface (if existing ).

If you adored this article and you would like to collect more info concerning autoradio-adapter Einbau Tipps i implore you to visit our web site. Now connect the connections to the brand new radio. Generally, the relations only fit on one connection, which means you should have no difficulties. Then gently push the cables back into the compartment and slide the radio behind. Ensure to merely insert the radio about halfway, because you ought to do a little test now.

Most errors when installing a new radio are made when assigning the cables. First, make sure which cable goes where. You need to pay particular attention to the wires that are live. Mostly the live wires are red and black. Red is the positive rod, it contributes to the battery into the car radio. Black, on the other hand, is that the negative pole, it is returned by the radio. But beware! Sometimes the negative rod cable is also blue or brownish!

For a few radios this is done via the antenna output. One speaks then of an energetic exit. In the event the new radio doesn’t have it (therefore it’s”passive”), then you may even use a special adapter plug in here. One speaks then of a ghost power. In principle, it works without it. But, then the radio reception is poorer. If you take care of these things in advance, everything will probably be easier to do later.

If everything works perfectly, you are able to install the auto radio completely. If that isn’t true, there is most likely a wrong wiring. Insert the cables and test again. Suggestion: it’s best to program a radio channel. If that is no longer saved when you turn the radio off and on, likely something is wrong with the pin assignment. If the car radio is in the ideal place, attach the cover or the frame of the new car radio. Already it is possible to listen to your favorite tunes as you wish.

Now carefully pull on the tool. The old car radio is currently falling out of control. Slowly pull the radio from the center console, taking extra care not to tear any wires. Then disconnect all links from the radio. Do not ruin themas they will need the cables again. Take now a flat screwdriver and eliminate the mounting framework of the old car radio from the tray. To do so, fold up all of the metal tabs so that you can then remove the frame.

Before you can set up the new radio, autoradio-adapter Einbau Tipps the old apparatus has to be removed. Most manufacturers offer the necessary tools with the buy. However, if you can not find it, this is not a big barrier. Only go to your car dealer. They build the older radio with a few simple actions. Irrespective of who eliminates the radio, then you should then ensure that the connection wires do not disappear in the slot, since you still want them.


21 April 2019

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *


1 + 9 =